Processing firewood means running saws and splitters for hours. These are the basics from OSHA and equipment manufacturers. They don't replace training or your equipment's manual.
Chainsaws
From OSHA's "Working Safely with Chainsaws" fact sheet:
- Check the controls, chain tension and safety devices before you start.
- Fuel the saw at least 10 feet from any source of ignition.
- Start the saw on the ground, with the chain brake engaged.
- Keep both hands on the saw while it's running.
- Watch for kickback: stay out of the kickback zone at the tip of the bar, and use chain brakes and low-kickback chains.
- Don't cut overhead.
- Engage the chain brake when carrying the saw more than 50 feet.
- Don't work alone.
When OSHA wrote its logging rule, it reported that over half of chainsaw accidents involved kickback.
Protective gear
- OSHA's protective equipment guidance for chainsaw work lists chaps, hearing protection and a face guard.
- OSHA's logging standard requires cut-resistant leg protection from the thigh to the top of the boot, and prohibits disabling anti-kickback devices.
Log splitters
We didn't find an OSHA or extension publication on splitters, but manufacturers' manuals agree on the basics:
- One person loads and runs the machine.
- Keep hands and feet out of the space between the log and the wedge.
- Hold logs by the sides, not the ends.
- Never check for hydraulic leaks with your hand. Pressurized fluid can penetrate skin.
- Keep bystanders well back.
Read the manual for your specific machine.
Deliveries
Stacking and unloading are the other place firewood crews get hurt. Use gloves, lift with care, and don't let a load slide off a truck or trailer near people or pets.