"Seasoned" is the claim buyers trust least, because wet wood sold as dry is one of the most common firewood complaints. Here's what the published guidance says, and how to back up your claim.
The target: 20 percent or less
Most US sources agree on 20 percent moisture or less for wood that's ready to burn:
- EPA's Burn Wise program: "Properly dried wood should have a reading of 20% or less." (Burn Wise ran 2009 to 2025 and is now an archived record.)
- University of New Hampshire Extension and University of Illinois Extension: 20 percent or less.
- University of Tennessee Extension: below 20 percent.
A few sources use 25 percent, so you'll see both numbers. Wood for fire's cord standard requires seasoned wood under 25 percent and kiln-dried wood under 20 percent; aiming for 20 percent on everything gives customers the best burn.
How long drying takes
- EPA Burn Wise: at least 6 months for softwoods, at least 12 months for hardwoods.
- UNH Extension: at least 6 to 12 months.
- Illinois Extension: at least 6 to 9 months.
Splitting speeds drying, and dense hardwoods take longer. We haven't found an authoritative oak-specific drying time; the "18 to 36 months" figures online come from commercial sites.
How to test with a moisture meter
Testing the outside of a log tells you very little. To get a real reading:
- Take a piece from the middle of the pile, not the top.
- Split it.
- Push the meter's pins into the freshly split face, along the grain.
- Test several pieces from different parts of the pile.
EPA notes that basic meters cost about $15 to $40. On wood for fire, drivers can add a moisture-meter reading to the delivery photos, and the customer sees it.
Kiln-dried vs. heat-treated
- There's no US legal definition of kiln-dried. It describes drying, not pest treatment.
- Certified heat-treated wood has met a temperature and time standard (commonly 60°C at the core for 60 minutes) and been certified by a state agency or USDA.
- A load can be one without the other. Don't use either term unless it's true.
Storing wood so it stays dry
- New Mexico State University Extension suggests stacking firewood at least 30 feet from structures.