A good firewood rack does three jobs: keeps wood off the ground, lets wind move through the stack, and holds a known amount of wood so you can tell at a glance how much you have left. Almost any rack does the first job. The difference between a good one and a frustrating one is in the other two.
This guide covers the main kinds of racks, what each is best for, how to size one for the wood you actually buy, and what to check before you pay. Prefer to build your own? We have free plans for a 2x4 wood rack and a welded steel rack.
Size the Rack to the Wood You Buy
Firewood is sold by the cord: 128 cubic feet, stacked. Most delivered firewood is cut to about 16 inches long, so a single row of it on a rack is 16 inches deep. That makes the math simple:
| Rack size (length x height) | Holds, with 16 in. wood | About |
|---|---|---|
| 4 ft x 4 ft | 21 cubic feet | 1/6 cord |
| 6 ft x 4 ft | 32 cubic feet | quarter cord |
| 8 ft x 4 ft | 43 cubic feet | 1/3 cord |
| 12 ft x 4 ft | 64 cubic feet | half cord |
| 24 ft x 4 ft | 128 cubic feet | full cord |
So if you order a half cord, plan on 12 feet of 4-foot-tall rack, or two 6-foot racks. A full cord needs 24 feet. Most people buy a rack that's too small and end up with half the delivery on the ground.
A rack that holds an exact fraction of a cord has a bonus: you can check your delivery. Fill the rack, and you'll know whether you got what you paid for. Here's how a cord is measured.
The Main Kinds of Firewood Racks
Steel tube racks: best for most yards
The classic outdoor rack: a welded or bolted steel tube frame with two end hoops and a raised base. They're inexpensive, quick to assemble and come in 4, 8, 12 and 16 foot lengths.
Look for: heavy-gauge tube (1-1/2 inch square tube is sturdy; thin round tube bows under a full load), a powder-coated finish, and a base that sits at least 4 inches off the ground. Bolt-together sections are easier to ship and to extend later.
Watch out for: racks sold by "face cord" capacity. That's not a legal unit, and it hides how much wood the rack really holds. Convert to cubic feet using the table above.
Covered racks: best where it rains a lot
The same frame with a fitted cover or a hard roof. A cover that only goes over the top, with a short overhang, is what you want. Covers that wrap down the sides trap moisture and slow drying, the opposite of the point. More on covering firewood properly.
Look for: a cover that fastens down so wind can't lift it, and sides that stay open or are only partly covered.
Bracket kits: best value for a big stack
Steel brackets that turn standard 2x4 boards into a rack. You buy the brackets, cut the lumber to whatever length you want and screw it together. They're one of the cheapest ways to store a full cord, and you can build a rack sized to fit an exact spot.
Look for: brackets that take pressure-treated lumber and hold the base rails at least a few inches off the ground. Use ground-contact rated lumber.
Indoor racks and log holders: best by the fireplace
Small steel or wood racks, hoops and carts that keep a day or two of wood next to the stove. They aren't for storage, and you shouldn't keep more than a few days of wood inside: firewood brings in insects, and it dries out the stack you'll burn anyway.
Look for: a tray or base that catches bark and debris, and a footprint that fits your hearth.
Wall-mounted and porch racks: best for small spaces
Brackets or shelves that hold a short stack against a wall or porch post. Handy for a week of wood by the back door.
Watch out for: stacking against your house. Keep long-term storage at least 20 feet away so termites and carpenter ants don't take the woodpile as a ramp to your framing.
DIY racks: best fit and lowest cost per cord
If you have a saw and a drill, a 2x4 rack is a two-hour project and costs less than most store-bought racks of the same size. A welded steel rack takes a welder and an afternoon, and will outlast everything else on this list. Our free plans both hold exactly a quarter cord of 16-inch wood:
What to Check Before You Buy
- Real capacity in cubic feet. Length x height x log length, in feet. Ignore "face cord" and "rick" claims.
- Ground clearance. At least 4 inches. More is better on damp ground.
- Load strength. A full quarter cord of seasoned oak weighs roughly half a ton. The frame shouldn't sag in the middle.
- Finish. Powder coat or galvanizing on steel; ground-contact rated lumber on wood.
- End supports that don't lean out. Cross-ties or braces at the ends keep a full rack from spreading.
- Room to grow. Racks that bolt together end to end let you add capacity next season.
Where to Put It
Pick a spot with sun for part of the day and some wind, at least 20 feet from the house, on level ground or pavers. Stack bark side up, one row deep, and cover only the top. Our firewood storage guide has the details.
Fill It With the Right Amount
Once you know your rack holds a quarter, half or full cord, order exactly that. Every supplier on wood for fire sells by the cord with cubic feet listed, so the wood fits the rack you built for it. See firewood near you.